1. You’ll get the job done faster.
Multifil brushes remove oil and steel particles up to 50% better in comparison to conventional bristles
Multifil brushes remove oil and steel particles up to 50% better in comparison to conventional bristles
2. Your strip will be cleaner.
Multifil bristles are grouped together. The added strength means they grind debris off by up to 50% better.
Multifil bristles are grouped together. The added strength means they grind debris off by up to 50% better.
3. Your brush won’t fatigue in the chemicals and heat.
Multifil bristles have been configured to work in the environments they face in the pickling lines and in the rinse sections.
Multifil bristles have been configured to work in the environments they face in the pickling lines and in the rinse sections.
4. You won’t have to replace your brushes as often.
Multifil brushes are bonded so they wear out slower and more uniformly. That’s going to increase the life of the brushes between 25% and 100% (depending on the application).
Multifil brushes are bonded so they wear out slower and more uniformly. That’s going to increase the life of the brushes between 25% and 100% (depending on the application).
5. You’ll get the amount of load/peen you need.
Grit + abrasive powder + thousands of microfilaments bound and held together with a special resin= a stiff, strong bristle. That makes for a high-performance brush that can handle a peen force much higher than any conventional brush.
Grit + abrasive powder + thousands of microfilaments bound and held together with a special resin= a stiff, strong bristle. That makes for a high-performance brush that can handle a peen force much higher than any conventional brush.
6. The strip won’t come out with patches of grease, tines, and debris.
The bristles on a multifil brush move only backward—not to the sides. This delivers a uniform, consistent, complete clean.
The bristles on a multifil brush move only backward—not to the sides. This delivers a uniform, consistent, complete clean.
Conventional vs. Multifil Clean
7. You can get these results in 30 minutes.
Use your machine and your guys to replace the brushes. Multifil brushes can be applied to any brush unit with hammer and a knocking bar.
Use your machine and your guys to replace the brushes. Multifil brushes can be applied to any brush unit with hammer and a knocking bar.
Ready to start saving money and improving your stress levels? It’s as simple as a call to APT: 816-382-9150
